sealnas.blogg.se

1. DL380 GEN9 SERVICE PACK HOW TO
2. DL380 GEN9 SERVICE PACK INSTALL
3. DL380 GEN9 SERVICE PACK DRIVERS
4. DL380 GEN9 SERVICE PACK UPDATE

The name of the bundle file will take the form hpsb- yyyy. However, you should review the Support Guide for information on supported configurations and known issues.

DL380 GEN9 SERVICE PACK DRIVERS

The inbox drivers should be sufficient for successful OS deployment.

DL380 GEN9 SERVICE PACK INSTALL

Install Solaris 11 using the base media from Oracle. Arduino 4 digit 7 segment display clock with rtc ds3231Īdds additional networking and storage driver support for Solaris Reboot Requirement: Reboot is required after installation for updates to take effect and hardware stability to be maintained. NOTE: A system reboot using 'reboot -p' or a hardware reset from the system console is required after updating with these software components.

DL380 GEN9 SERVICE PACK UPDATE

Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.

“path”: “/redfish/v1/Systems/1/Actions/Oem/Hp/ComputerSystemExt.SystemReset/”, ilorest login 10.0.1.1 -u adminusername -p password123.Run RESTful Interface Tool as administrator.In my example it was located in the user’s documents folder Create a text file called auxcycle.json and enter the information below, save it in the location in which you are running the tool.I followed the HPE reference guide and performed the following commands to initiate the AuxCycle on the server. The RESTful Interface Tool connects to the Integrated Lights-Out system and allows the use of a comprehensive iLO RESTful API’s to perform tasks on an iLO system. This can be done by making use of the RESTful Interface Tool. Since iLO 4 version 2.55 a feature was added to perform an auxiliary power-cycle on a server remotely. This time I decided to utilise a different method to get the server operational. When the same fault occurred again, I thought there must be an easier way than driving to the location of the server or initiating remote hands support.

After patching the server, I was hoping it would resolve the issue, but alas it didn’t. The classic ‘fix’ from HPE was to pull the power cords from the server, this then magically ‘resolved’ the issue and we were able to carry on with the scheduled maintenance. Unfortunately, the usual cold boot or iLO resets didn’t work, I had to utilise one of the most trusty troubleshooting tips of all time.

DL380 GEN9 SERVICE PACK HOW TO

Thankfully I’ve been through this before and knew how to work around the issue. The only NIC’s visible were Adapter 1 – iLO and Adapter 2 – HPE Ethernet 1GB 4-Port 331i Adapter. When checking the system’s BIOS there were no references to the PCI card, in the iLO system information it had completely disappeared. The server was patched with Windows Updates and restarted before the installation of the HPE Service Support Pack.Īt which point it became clear the HPE FlexibleLOM NIC was missing from the server configuration. Last week was a prime example and the second time this has happened for a server. During routine maintenance, I’ve had occasions where HPE D元80 Gen9 Servers lose the plot when rebooted.